Transcendent NVR Series
8.2 Playback Interface Introduction
Click
on the tool bar at the bottom of the live preview interface or click StartàPlayback
to go to the playback interface as shown below (click
preview interface to set the default playback time).
The added cameras will playback in the playback interface automatically. You can also add the
camera manually. Click
Check the cameras in the window and then click "Add" to add camera. The system supports a
maximum of 16 synchronous cameras.
The buttons on the tool bar (area ①) at the bottom of the playback interface are introduced in
the table below.
Button
in the playback window to pop up the "Add Camera" window.
Meaning
53
on the tool bar at the bottom of the live