Edit Camera - Vitek VT-TNR818P Manual

Transcendent NVR Series
Check the cameras and then click "Add" to add cameras. Click to edit the camera's IP
address, username and password. Click "Default Password" to set the default username and
password of each camera.
Add Manually
Ø
Input the IP address, port, username and password of the camera and then select the protocol.
Click "Test" to test the effectiveness of the input information and then click "Add" button (you
can input one camera's information or above such as IP address, username and password
before clicking "Add" button). Click to delete the camera. Click "Default Password" to
set the default username and password of each camera.
4.1.2

Edit Camera

Click "Edit Camera" in the setup panel to go to the interface as shown below. Click to
to edit the camera (see Add
view the live image of the camera in a popup window. Click
camera in 3.1Startup Wizard for details). Click to delete the camera.
Note:
If you use the NVR with PoE network ports, the IP cameras (with PoE function) which directly
connect to the PoE port of the NVR will be displayed automatically in the camera list. Refer to
the picture below. The IP camera's which occupies the PoE resource has a prefix shown before
its camera name. The prefix consists of PoE plus PoE port number. The IP cameras which
connect to the PoE ports cannot be deleted from the camera list manually.
28