Quick Sequence View; Camera Group View In Sequence - Vitek VT-TNR818P Manual

Transcendent NVR Series
Click "Save" button under the display mode list and then enter the display mode name in
the popup window, click "OK" button to save the current display mode.
Method Two:
Click StartàSettingsàSystemàBasicàOutput Settings to go to the interface and then
set the screen mode.
Double click the camera or camera group in the list to add them to the selected window.
Click
detail configurations). The display mode will be saved and displayed in the display mode list in
the live preview interface.
Edit Display Mode
Ø
Click "Customize Display Modes" tab in the live preview interface and then select one display
mode in the list. Click "Rename" to edit the display mode name; click "Delete" to delete the
display mode.
5.2.2

Quick Sequence View

You can start quick sequence view if the scheme has not been created. If the scheme has been
created, please refer to 5.2.4 Scheme View in Sequence for details.
Go to the live preview interface and then click
time in the window and then click
camera number of the current screen mode. Double click the sequence view interface to pause
the view; double click again to restore the view. Click
5.2.3

Camera Group View In Sequence

You can start camera group view in sequence if camera group has been created (see 4.2.1 Add
to save the current display mode (refer to 5.2.4 Scheme View In Sequence for
to pop up a little window. Set the dwell
to view the live group by group according to the
to stop the view.
33