Port Configuration - Vitek VT-TNR818P Manual
4, 8, 16, 32, and 64 channel 8 megapixel h.265 real time network video recorders with 4k hdmi output
Hide thumbs
Also See for VT-TNR818P:
- User manual (186 pages) ,
- Manual (104 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Transcendent NVR Series
PPPoE Settings
Ø
In the above interface, check "Enable" in "PPPoE Settings" and then input the username and
password obtained from the dealer. Click "Apply" to save the settings.
11.1.2
Port Configuration
Click StartàSettingsàNetworkàPort to go to the interface as shown below. Input the HTTP
port, server port and RTSP port of the NVR and then click "Apply" to save the ports.
HTTP Port: the default HTTP port of the NVR is 80. The port number can be changed to
others like 81. The port is used for remote access. If you want to access the NVR through IE,
you should input the IP address plus HTTP port in the IE address bar like
http://192.168.11.61:81.
Server Port: the default server port of the NVR is 6036. The server port number can be
75
Advertisement
Table of Contents
