Remote Backup; Remote Configuration - Vitek VT-TNR818P Manual

Button
Stop button.
Rewind button. Click to play video backward.
Play button. Click to play video forward.
Pause button.
Deceleration button. Click to decrease the playing speed.
Acceleration button. Click to increase the playing speed.
Previous frame button. It works only when forward playing is paused in single screen mode.
Next frame button. It works only when forward playing is paused in single screen mode.
Click
Backup start time button. Click the time scale and then click to set the backup start time.
Backup end time button. Click the time scale and then click to set the backup end time.
Backup button.
Backup tasks button. Click to view the backup status.
Event list button. Click to view the event record of manual/schedule/sensor/motion.
11.10.3

Remote Backup

Click "Backup" in the remote interface to go to the backup interface. You can back up the
record by event or by time.
By Event
Ø
Check the record type on the left side of the interface and then click
and end time; check the cameras and then click
searched recorded data will be displayed in the list); check the recorded data in the list and then
click "Backup" button to backup the record.
By Time
Ø
Click to set the start time and end time on the left side of the interface; check the
cameras and then click
View Backup Status: Click "Backup Status" to view the backup status. Click "Pause" to pause
the backup; click "Resume" to continue the backup; click "Delete" to delete the task.
11.10.4

Remote Configuration

Click "Function Panel" in the remote interface and then configure the camera, record, alarm,
disk, network, account and authority and system of the NVR remotely. All of these settings are
similar to that of the NVR. See the configurations of the NVR for details.
to step backward 30s and click
on the right side to backup the recording.
Transcendent NVR Series
Meaning
to step forward 30s.
on the right side to search the record (the
90
to set the start time