Ddns Configuration - Vitek VT-TNR818P Manual

changed as required. The port is used with the network video management system.
RTSP Port: RTSP real-time stream protocol can be used to control the sending of real-time
data by media player which supports the RTSP real-time stream protocol, The default RTSP
port is 554 and it can be changed as required.
Note: The HTTP port and server port of the NVR should be mapped to the router before you access
the NVR via WAN.
11.1.3

DDNS Configuration

The DDNS is used to control the dynamic IP address through domain name. You can access
the NVR easily if the DDNS is enabled and configured.
Click StartàSettingsàNetworkàDDNS to go to the interface as shown below.
Check "Enable" and then select the DDNS type. Input the server address, domain name,
username and password according to the selected DDNS type. Click "Test" to test
the effectiveness of the input information. Click "Apply" to save the settings.
You will have to input the server address and domain name if some DDNS types are selected.
Go to the relative DNS website to register domain name and then input the registered domain
information here). Take www.vitekivpddns.com for example.
Input www.vitekivpddns.com in the IE address bar to visit its DNS website.
Transcendent NVR Series
76