Front Panel Descriptions - Vitek VT-TNR818P Manual

Alarm Management
Alarm schedule setting
l
Support enabling or disabling of the motion detection, external sensor alarm input and
l
exception alarms including IP address conflict alarm, disk IO error alarm, disk full alarm, no
disk alarm, illegal access alarm, network disconnection alarm, IPC offline alarm, alarm trigger
configuration support
IPC offline alarm trigger configuration of PTZ, snapshot, pop-up video, etc.
l
Event notification modes of alarm-out, pop-up video, pop-up message box, buzzer, e-mail
l
The snapshot images can be attached into an e-mail when alarm linkage is triggered
l
Alarm status view of alarm-in, alarm-out, motion detection and exception alarm
l
Alarm triggered and cleared manually
l
System auto reboot when exception happens
l
Network Functions
Support TCP/IP and PPPoE, DHCP, DNS, DDNS, UPnP, NTP, SMTP protocol
l
Allow and block list function of IP address/IP segment/MAC address
l
Support multiple browsers including IE8/9/10/11, Firefox, Opera, Chrome (available only
l
for versions lower than 45) and Safari in MAC system
Remote configuration, import and export of the NVR parameters and other system
l
maintenance operations including remote upgrading and system restart
Remote camera configuration of the NVR including video parameters, image quality
l
Remote searching, playback and backup of the NVR
l
Manual alarm can be triggered and cleared remotely
l
Supports NAT function and QRCode scanning by mobile phone and PAD
l
Support mobile surveillance by phones or PADs with iOS or Android OS
l
Other Functions
The NVR can be controlled and operated by the buttons on the front panel (model
l
dependent), the remote control and the mouse
Supports NVR information viewing including basic, camera status, alarm status, record
l
status, network status, disk and backup status
Factory default, import and export of the system configuration, log view and export and
l
local upgrading by USB mobile device
Auto recognition of the display resolution
l

1.3 Front Panel Descriptions

The following descriptions are for reference only.
Type I:
Name
REC
Net
Power
Fn
Descriptions
When recording, the light is blue
When access to network , the light is blue
Power indicator, when connection , the light is blue
No function temporarily
8
Transcendent NVR Series