Edit Permission Group; Block And Allow List; Preview On Logout - Vitek VT-TR5HA1620 Manual

10.3.2

Edit Permission Group

Go to "Edit Permission Group" interface and then click
permission group (the operations of the "Edit Permission Group" are similar to that of the "Add
Permission Group", please see 10.3.1 Add Permission Group for details). Click
the group as another group. Click
permission groups ("Administrator", "Advanced" and "Common") cannot be deleted.
10.4

Block and Allow List

Click StartàSettingsàAccount and AuthorityàSecurity to go to the following interface.
Check "Enable" and then choose "Enable Allow List" or "Enable Block List" (the PC
client of which the IP address is in the allow list can access DVR remotely while the PC client
in the block list cannot).
Add IP/IP segment/MAC. Click "Add IP" or "Add MAC" button and then check "Enable"
in the popup window (only if you check it can the IP/IP segment/MAC you add be effective).
Enter the IP/IP segment/MAC and then click "OK" button. In the above interface, click
to edit IP/IP segment/MAC, click
10.5

Preview On Logout

Click StartàSettingsàAccount and AuthorityàSecurityàPreview On Logout to go to the
following interface.
Set a camera and then enable or disable the preview permission on logout as required. If a
camera's preview permission on logout is "ON", you can view the live image of the camera
when the system is logged out, or the live image of the camera cannot be seen when logged out.
Transcendent VT-TR5HA DVR Series
to delete the permission group. The three default
to delete it. Click "Apply" to save the settings.
84
in the group list to edit the
to save