Main Interface; Main Interface Introduction - Vitek VT-TNR818P Manual

Transcendent NVR Series

3.2 Main Interface

3.2.1

Main Interface Introduction

The buttons in area
Button
are introduced in the table below.
Start button. Click to pop up area ③.
Full screen button. Click to show full screen; click again to exit the full
screen.
Screen mode button.
Dwell button (see 5.2.2 Quick Sequence View and 5.2.4 Scheme View In
Sequence for details).
Click to enable OSD; click
Click to set the default playback time before starting instant playback (8.1
Instant Playback) or going to the playback interface for playback operations
(8.2 Playback Interface Introduction); click
interface. For instance, if you choose "5 minutes ago" as the default playback
time, you can playback the recording from the past five minutes.
Manual record button. Click to enable/disable record.
Manual alarm button. Click to trigger or clear the alarm-out manually in the
popup window.
Record status button. Click it to view the record status.
Alarm status button. Click it to view the alarm status.
Disk status button. Click it to view the disk status and RAID status.
Meaning
to disable OSD.
23
to go to the playback