Record & Disk Management; Record Configuration; Mode Configuration - Vitek VT-TNR818P Manual

Add Cruise
Ø
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click
window are similar to that of the PTZ control interface; please see 6.1 PTZ Control Interface
Introduction for details.
Edit Cruise
Ø
Select the camera and cruise in the "Cruise" interface. Input the new cruise name and then click
to save the cruise name. Click "Add Preset" to add preset to the cruise. Click
delete the preset from the cruise. Click one preset in the preset list and then click
move down the preset and click
click to stop it.
Delete Cruise
Ø
Click in the camera list on the right side of the interface to display the cruise information
of the dome and then click
7 Record & Disk Management

7.1 Record Configuration

7.1.1

Mode Configuration

Please format the HDDs before recording (refer to 7.5 Disk Management for details). Click
StartàSettingsàRecordàMode Settings to go to the mode settings interface. You can set the
record time under the "Manual Record Settings" and then click "Apply" button to save the
to add cruise. The operations of the "Add Cruise"
to move up the preset. Click
on the top right corner of the cruise to delete the cruise.
44
Transcendent NVR Series
to start the cruise and
to
to