Preset Setting - Vitek VT-TNR818P Manual

Adjust the dome's direction and then click "Save Position" to save the current preset position
(you can also click another preset in the preset list and then save the preset position after
adjusting the dome's direction); click
button to delete the selected preset.
You can also go to preset setting interface for preset setting, see 6.2 Preset Setting for details.
Cruise Setting
Ø
Click "Cruise" to go to cruise operation tab and then click "Add" button to pop up a window as
shown below left. You can add 8 cruises for each dome at most.
Input the cruise name in the "Add Cruise" window and then click "Add preset" to pop up
the "Add Preset" window (Before adding preset to the cruise, please add preset of the dome
first).
In the "Add Preset" window, select the preset name, preset time and preset speed and then
click "OK" button.
In the "Add Cruise" window, you can click
preset time and speed. Click
Click to start the cruise and click
operation tab; click "Delete" button to delete the selected cruise.
You can also go to cruise setting interface for cruise setting, see 6.3 Cruise Setting for details.

6.2 Preset Setting

Click StartàSettingsàCameraàPTZàPreset to go to the interface as shown below.
in the preset list to call the preset; click "Delete"
to delete the preset. Click "Add" button to save the cruise.
to stop the cruise in the cruise list of the cruise
42
Transcendent NVR Series
to reselect the preset, then change the