Cruise Setting - Vitek VT-TNR818P Manual
4, 8, 16, 32, and 64 channel 8 megapixel h.265 real time network video recorders with 4k hdmi output
Hide thumbs
Also See for VT-TNR818P:
- User manual (186 pages) ,
- Manual (104 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Transcendent NVR Series
Add preset
Ø
Select camera and then click "Add" button to add preset; or click
the right side of the interface to display the preset information of the dome and then click
to add preset. The operations of the "Add Preset" window are similar to that of the
PTZ control interface; please see 6.1 PTZ Control Interface Introduction for details.
Edit preset
Ø
Select camera and preset. You can input the new name of the preset and then click
save the new preset name. Adjust the rotating speed, position, zoom, focus and iris of the preset
and then click "Save Position" to save the preset.
Delete Preset
Ø
Select camera and preset and then click "Delete" to delete the preset.
6.3 Cruise Setting
Click StartàSettingsàCameraàPTZàCruise to go to the interface as shown below.
43
in the camera list on
to
Advertisement
Table of Contents
