Main Functions - Vitek VT-TNR818P Manual
4, 8, 16, 32, and 64 channel 8 megapixel h.265 real time network video recorders with 4k hdmi output
Hide thumbs
Also See for VT-TNR818P:
- User manual (186 pages) ,
- Manual (104 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Click the main menus on the top of the camera management interface to go to corresponding
interfaces. Refer to the picture below. For instance, you can go to system setup interface by
clicking "System" tag.
3.2.3
Main Functions
Camera
Ø
The module covers the functions such as Camera Management (see Chapter 4 Camera
Management for details), Image Settings (see 5.3 Preview Image Configuration for details),
Motion (see 9.2.1 Motion Configuration for details) and PTZ (see Chapter 6 PTZ for details).
Record
Ø
The module covers the functions such as Encode Parameters and Record Schedule. Please see
Chapter 7 Record & Disk Management for details.
Disk
Ø
The module covers the functions such as Disk Management, Storage Mode and Disk
Information. Please see Chapter 7 Record & Disk Management for details.
Alarm
Ø
The module covers the functions such as Sensor and Motion Alarm Handling and Alarm Out
Settings. Please see Chapter 9 Alarm Management for details.
Network
Ø
The module covers the functions such as TCP/IPv4, DDNS, Port, E-mail and Network Status.
Please see 11.1 Network Configuration for details.
Account and Authority
Ø
The module covers the functions such as Account Management (see 10.1 Account
Transcendent NVR Series
26
Advertisement
Table of Contents
