Upnp Configuration - Vitek VT-TNR818P Manual

Transcendent NVR Series
Click "Edit Recipient" to go to the following interface.
Click "Add" and then input the recipient's e-mail address in the popup window. Click "Add" in
the window to add the recipient. Click
save the settings. Click "Edit Sender" to go to the e-mail configuration interface of the sender.
11.1.5

UPnP Configuration

By UPnP you can access the NVR through IE client which is in WAN via router without port
mapping.
Click StartàSettingsàNetworkàUPnP to go to the following interface.
Make sure the router supports UPnP function and the UPnP is enabled in the router.
to delete the recipient in the list. Click "Apply" to
79