Remote Playback - Vitek VT-TNR818P Manual

Transcendent NVR Series
Operation panel introduction:
Button
PTZ panel introduction:
Button
11.10.2

Remote Playback

Click "Playback" in the remote interface to go to the playback interface.
Check the record event types and cameras on the left panel. Set the record date on the
calendar beside the time scale.
Click
time scale to play the recording.
The operation of the playback time scale is similar to that of the time scale in the main program
of the NVR. Please refer to 8.2 Playback Interface Introduction for details.
Introduction of playback control buttons:
Click to take snapshot.
Click to start recording; click it again to stop recording.
Click to zoom in the image of the camera and then drag the mouse on the
camera image to view the hidden area.
Click to zoom out the image of the camera.
The 3D zoom in function is designed for PTZ's Click the button and then
drag the image to zoom in or zoom out the image; click the image on
different areas to view the image of the dome, Omni-directionally.
Click to close the preview camera.
Click to enable audio and then drag the slider bar to adjust the volume. You
can listen to the cameras audio by enabling audio.
Click /
to rotate the dome; click
Drag the slider to adjust the rotating speed of dome.
Click /
Click /
Click /
Click it to view the preset list and then click the button in the list to call
the preset.
Click it to view the cruise list and then click the corresponding buttons
in the list to start or stop the cruise.
to search the record data and then click
Meaning
Meaning
/ / /
to stop rotating the dome.
to zoom in/out camera image.
to increase/ decrease the focal length.
to increase/decrease the iris of the dome.
89
/ / /
or directly click the