Edit Permission Group; Black And White List; Device Management; Network Configuration - Vitek VT-TTAR810 User Manual

10.3.2

Edit Permission Group

Go to "Edit Permission Group" interface and then click
permission group (the operations of the "Edit Permission Group" are similar to that of the "Add
Permission Group", please see 10.3.1 Add Permission Group for details). Click
the group as another group. Click
permission groups ("Administrator", "Advanced" and "Ordinary") cannot be deleted.

10.4 Black and White List

Click StartàSettingsàAccount and AuthorityàSecurity to go to the following
interface.
Check "Enable" and then choose "Enable Allow List" or "Enable Block List" (the PC
client of which the IP address is in the allow list can access DVR remotely while the PC client
in the block list cannot).
Add IP segment/MAC. Click "Add IP" or "Add MAC" button and then check "Enable" in
the popup window (only if you check it can the IP segment/MAC you add be effective). Enter
the IP segment/MAC and then click "OK" button. In the above interface, click
segment/MAC, click

11.1 Network Configuration

11.1.1

TCP/IPv4 Configuration

Ø IP Address Settings
Click StartàSettingsàNetworkàTCP/IPv4 to go to the following interface. Check "Obtain
an IP address automatically" and "Obtain DNS automatically" to get the IP address and DNS
automatically, or manually input IP address, subnet mask, gateway, preferred DNS and
alternate DNS. Click "Apply" to save the settings.
to delete it. Click "Apply" to save the settings.

11 Device Management

to delete the permission group. The three default
74
Transcendent DVR Series
in the group list to edit the
to save
to edit IP