Record Search & Playback; Search & Playback By Time-Sliced Image - Vitek VT-TNR818P Manual

Transcendent NVR Series
Zoom In
Add Tag
Switch Camera
Close Camera
Introduction of area ④:
Click to set the date; click
recording from the time you set. You can check the record type as required for record playback;
first you should click
cameras, then check the record type (
motion based record;
to add camera for playback (the recording time scale will show the record data of the checked
record type only after the above operations).
Introduction of the record time scale (area ⑤) :
A tool bar will appear after moving the mouse to the record time scale. Click
zoom in/out of timeline; click
timeline or slide the scroll wheel of the mouse on the time scale to show hidden time on the top
or bottom of the timeline. You can also click
timeline or click
at the bottom of the time scale to show hidden playback cameras.
The record time scale shows different record types with different colors. The green block
stands for manual record, red block stands for sensor based record, yellow block stands for
motion based record and blue block stands for schedule record. Click the record block to set the
time and then the camera will play the recording from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or Drag the color block on the time scale to select the backup area and then right click the area
click to pop up a backup information window. Click "Backup" button in the window to
pop up the backup window. Select the device, backup path and backup format and then click
"Backup" button to start the backup.
8.3 Record Search & Playback
8.3.1 Search & Playback by Time-sliced Image
Click StartàSearchàBy Time-sliced Image to go to "By Time-sliced Image" tab. There
are two view modes: by time and by camera. In the time view mode, a maximum of 64 camera
thumbnails can be showed. If the camera thumbnail number is more than 64, the cameras will
be listed directly by their camera name, not the thumbnail. A maximum of 196 camera names
can be listed. If the camera name number is more than 196, the time view mode will be
disabled and the camera view mode will be available only.
Click to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click to add tag. You can play back the recording by searching
the added tag. Click and then input the tag name in the popup
window. Click "Add" to add tag.
Click to switch the playback camera. Click and then check the
camera in the popup window. Click "OK" to change the camera.
Click to close the playback camera.
to set the time and then the playback will play the
on the tool bar at the bottom of the interface to clear all the playback
: manual record;
: schedule recording) and finally click
to recover the timeline to 24 hours' ratio. Drag the
to show the hidden time on the bottom of the timeline. Drag the slider
: sensor based record;
to show the hidden time on the top of the
55
in the playback window
/
:
to