Record Schedule Configuration; Record Mode; Manual Recording - Vitek VT-TNR818P Manual

Click "All" to set all week recording; click "Reverse" to swap the selected and unselected time
in a week; click "Clear All" to clear all the selected area in a week.
7.3.2

Record Schedule Configuration

Click StartàSettingsàRecordàRecord ScheduleàSchedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record and timed record.
Click "None" in the drop-down menu to clear the schedule. Click "Apply" to save the settings.
Go to "Edit Schedules" interface and then click
"Edit Schedule" are similar to that of the "Add Schedule". Click

7.4 Record Mode

7.4.1

Manual Recording

Method One: Click
recording of the camera.
Method Two: Go to live preview interface and then right-click and select "Manually Record
On" in the camera window or click
recording.
Note: Click Start à Settings à Record à Mode Settings and then set the manual record time in the
interface. Click "Apply" to save the settings.
on the tool bar at the bottom of the live preview interface to enable
on the tool bar under the camera window to start
50
Transcendent NVR Series
to edit the schedule. The settings of
to delete the schedule.