Quick Sequence View - Vitek TRANSCENDENT VT-TR5HA Series Manual

Live Preview Introduction
Add Display Mode
Ø
Method One:
Click "Customize Display Modes" in the above interface and then set the screen mode.
Add the cameras and adjust the cameras' display sequence as needed.
Click
window, click the "OK" button to save the current display mode.
Method Two:
Click StartàSettingsàSystemàBasicàOutput SettingsàMain Output to go to the
interface and then set the screen mode.
Double click the camera or camera group in the list to add them to the selected window.
Click
detail configurations). The display mode will be saved and displayed in the display mode list in
the live preview interface.
Edit Display Mode
Ø
Click the "Customize Display Modes" tab in the live preview interface and then select one
display mode in the list. Click
display mode.
5.2.2

Quick Sequence View

You can start quick sequence view if the scheme has not been created. If the scheme has been
created, please refer to 5.2.3 Scheme View in Sequence for details.
under the display mode list and then enter the display mode name in the popup
to save the current display mode (refer to 5.2.3 Scheme View In Sequence for
to edit the display mode name; click
28
DVR User Manual
to delete the