Quick Sequence View - Vitek Transcendent VT-TR2HA Series Manual

Live Preview Introduction
Add Display Mode Add Display Mode
Method One: Method One:
Click "Customize Display Modes" in the above interface and then set the screen mode. Click "Customize Display Modes" in the above interface and then set the screen mode.
Add the cameras and adjust the cameras' display sequence as needed. Add the cameras and adjust the cameras' display sequence as needed.
Click Click under the display mode list and then enter the display mode name in the popup
window, click the "OK" button to save the current display mode. window, click the "OK" button to save the current display mode.
Method Two: Method Two:
Click Start Settings System Basic Output Settings Main Output to go to the Click Start Settings System Basic Output Settings Main Output to go to the
interface and then set the screen mode. interface and then set the screen mode.
Double click the camera or camera group in the list to add them to the selected window. Double click the camera or camera group in the list to add them to the selected window.
Click Click to save the current display mode (refer to 5.2.3 Scheme View In Sequence for
detail configurations). The display mode will be saved and displayed in the display mode list in detail configurations). The display mode will be saved and displayed in the display mode list in
the live preview interface. the live preview interface.
Edit Display Mode Edit Display Mode
Click the "Customize Display Modes" tab in the live preview interface and then select one Click the "Customize Display Modes" tab in the live preview interface and then select one
display mode in the list. Click display mode in the list. Click
display mode. display mode.
5.2.2

Quick Sequence View

Quick Sequence View
You can start quick sequence view if the scheme has not been created. If the scheme has been You can start quick sequence view if the scheme has not been created. If the scheme has been
created, please refer to 5.2.3 Scheme View in Sequence for details. created, please refer to 5.2.3 Scheme View in Sequence for details.
under the display mode list and then enter the display mode name in the popup
to save the current display mode (refer to 5.2.3 Scheme View In Sequence for
to edit the display mode name; click to edit the display mode name; click
28 28
DVR User Manual DVR User Manual
to delete the to delete the