Reviewing Known Point Data - Sokkia 130R Series Operator's Manual

PROCEDURE Clearing all coordinate data at once (initialization)
1. Select "Known data" in Memory
Mode.
2. Select "Clear" and press {
3. Press [YES].
<Known data> is restored.
22.2

Reviewing Known Point Data

It is possible to display all the coordinate data within the current JOB.
PROCEDURE
1. Select "Known data" in Memory
Mode.
• Current JOB name is displayed.
2. Select "View."
The point number list is displayed.
3. Select the point number to be
displayed and press {
The coordinates of the selected
point number are displayed.
22. REGISTERING/DELETING DATA
}.
Known data
Job.JOB1
Clear
Comms setup
Known data
Job.JOB1
Key in coord
Comms input
Deletion
View
}.
105