Registering/Deleting Codes; Reviewing Known Point Data - Sokkia iM-50 Series Operator's Manual

30.2 Reviewing Known Point Data

It is possible to display all the coordinate data within the current JOB.
PROCEDURE
1. Select "Known data" in Data Mode.
• Current JOB name is displayed.
2. Select "View".
The point name list is displayed.
3. Select the point name to be displayed and press {ENT}.
The coordinates of the selected point name are displayed.
4. Press {ESC} to restore the point name list.
Press {ESC} again to restore <Known data>.

30.3 Registering/Deleting Codes

It is possible to save codes in memory. You can also read in codes registered in memory when recording
instrument station data or observation data.
PROCEDURE Inputting Codes
1. Select "Code" in Data Mode.
30. REGISTERING/DELETING DATA
Known data
Job.JOB1
Key in coord
Comms input
Deletion
View
PT
PT
PT
PT
PT
PT
Data
JOB
Known data
Code
168
012
013
POINT01
ABCDEF
123456789
FIRST LAST SRCH