Recording Coordinate Data - Sokkia CX Series Operator's Manual

28. RECORDING DATA - TOPO MENU -
5. To continue measurement, sight
the next point, press [MEAS], then
perform steps 3 and 4 above.
Angle value is displayed in real
time until [REC] is pressed.
• Press [AUTO] to perform
distance measurement and
automatically record the results.
[AUTO] is convenient for
recording measurement data
when point name, code, and
target height are not set.
• Press [OFFSET] to offset
measurement in TOPO Mode.
6. Press {ESC} to quit measurement
and restore <TOPO>.

28.5 Recording Coordinate Data

Coordinate data can be stored in the current JOB
PROCEDURE
1. Perform coordinates
measurement in the OBS mode
screen.
"14. COORDINATE
MEASUREMENT"
206
SD
ZA
HA-R
HR
CD
OFFSET
SD
ZA
HA-R
R e c o r d e d
MEAS
AUTO