Digital Input/Output (Dio) Connector; Figure 3-6: Battery Connector Location; Table 3-7: Battery Connector Pinouts - IEI Technology WAFER-CV-D25501 Series User Manual

CN Location: See Figure 3-6
CN Pinouts: See Table 3-7
This is connected to the system battery. The battery provides power to the system clock to
retain the time when power is turned off.

Figure 3-6: Battery Connector Location

Pin Description
1 Battery+
2 GND

Table 3-7: Battery Connector Pinouts

3.2.6 Digital Input/Output (DIO) Connector

CN Label: DIO1
CN Type: 10-pin header
See Figure 3-7
CN Location:
CN Pinouts: See Table 3-8
The digital input/output connector is managed through a Super I/O chip. The DIO
connector pins are user programmable.
Page 20
WAFER-CV-D25501/N26001 3.5" SBC