Lvds2 Voltage Selection; Figure 4-4: Lvds1 Voltage Selection Jumper Location; Table 4-5: Lvds2 Voltage Selection Jumper Settings - IEI Technology WAFER-CV-D25501 Series User Manual

WAFER-CV-D25501/N26001 3.5" SBC

Figure 4-4: LVDS1 Voltage Selection Jumper Location

4.4.4 LVDS2 Voltage Selection

WARNING:
Permanent damage to the screen and WAFER-CV-D25501/N26001
may occur if the wrong voltage is selected with this jumper. Please
refer to the user guide that came with the monitor to select the correct
voltage.
Jumper Label:
Jumper Type:
Jumper Settings:
Jumper Location:
Sets the voltage provided to the monitor connected to LVDS2.
Setting
Short 1-2
Short 2-3

Table 4-5: LVDS2 Voltage Selection Jumper Settings

JP1
3-pin header
See Table 4-5
See Figure 4-5
Description
+3.3V LVDS (Default)
+5V LVDS
Page 45