INVT Goodrive 200L Operation Manual page 47

inverters
Goodrive200L
Function
Name
code
braking
contactor
Detection
time of the
feedback
P01.29
signal of
braking
contactor
The control
selection of
P01.30 emergency
running
direction
Emergency
P01.31 running
frequency
P02 Group Motor 1
Rated power
P02.01
of AM 1
Rated
P02.02 frequency of
AM 1
Rated speed
P02.03
of AM 1
Rated
P02.04 voltage of
AM 1
Rated current
P02.05
of AM 1
Detailed instruction of parameters
fault. The inverter testing brake contactor
feedback signal, when inspection feedback
signal and the time beyond P01.29 feedback
check out time, inverter stop, but no BE code.
When signal of braking contactor feedback is
valid (P01.28=1), After the system output the
signal that makes the braking contactor close,
but the system still doesn't detect feedback
signal in P01.29 time, and the system
immediately stop the motor and report the fault of
detection of braking contactor feedback signal.
0:External controller
1:Inverter
0.00Hz~P00.03(max frequency)
0.1~3000.0kW
0.01Hz~P00.03(the Max. frequency)
1~36000rpm
0~1200V
0.8~6000.0A
42
Function parameters
Default
Modify
value
○
0.0s
○
0
○
5.00Hz
Depend
◎
on
model
50.00
◎
Hz
Depend
◎
on
model
Depend
◎
on
model
Depend
◎
on