Mower Conditioner / Tractor Unhook - Pull-Type; Drawbar Hitch Unhook - MacDon A30-S Operator's Manual

Pull-type mower conditioners, self-propelled auger headers
Table of Contents

Advertisement

6.5 MOWER CONDITIONER / TRACTOR
UNHOOK – PULL-TYPE
CAUTION
To prevent accidental movement of tractor,
shut off engine, engage parking brake, and
remove key.
To maintain stability, always lower the
machine
completely.
wheels before detaching from tractor.
6.5.1

Drawbar Hitch Unhook

a. Park machine on flat level surface with hitch at
an angle to tractor drawbar (to facilitate pump
detachment).
b. Lower header onto blocks or leave header
raised.
Engage lift cylinder lock-out valves if
leaving in raised position.
c. Move remote cylinder control valve lever back
and forth to relieve stored hydraulic pressure.
d. Disconnect
hydraulic
harness. Store hose ends in holes at front of
APT as shown.
B
e. Remove pin (A).
Form # 169000
OPERATION
Block
windrower
hoses
and
electrical
A
f.
Rotate hook (C) to lower position.
g. Pull back collar on driveline (B) and slide coupler
off tractor PTO shaft and position driveline in
hook.
h. Pull pin (D) securing jack (E) and move to
working position at front of APT. Secure jack
with pin (D).
i.
Lower jack to take weight off tractor drawbar.
30
C
D
E
D
E
(continued next page)
Model Year - 2009

Advertisement

Table of Contents
loading

This manual is also suitable for:

A30-dA40-d

Table of Contents