Safety; Safety Alert Symbol; Signal Words; Safety Signs - MacDon A30-S Operator's Manual

2 SAFETY

2.1 SAFETY ALERT SYMBOL

This safety alert symbol indicates important
safety messages in this manual and on safety
signs on the machine.
This symbol means:
ATTENTION!
BECOME ALERT!
YOUR SAFETY IS INVOLVED!
Carefully read and follow the safety message
accompanying this symbol.
WHY IS SAFETY IMPORTANT TO YOU?
ACCIDENTS DISABLE AND KILL
ACCIDENTS COST
ACCIDENTS CAN BE AVOIDED

2.2 SIGNAL WORDS

Note the use of the signal words DANGER,
WARNING, and CAUTION with safety messages.
The appropriate signal word for each message
has been selected using the following guidelines:
DANGER
Indicates an imminently hazardous situation
that, if not avoided, will result in death or
serious injury.
Form # 169000
SAFETY
Indicates a potentially hazardous situation
that, if not avoided, could result in death or
serious injury. It is also used to alert against
unsafe practices.
Indicates a potentially hazardous situation
that, if not avoided, may result in minor or
moderate injury. It is also used as a reminder
of good safety practices.

2.3 SAFETY SIGNS

The safety signs appear on the windrower at
•
the locations shown on pages 4 to 7.
• Keep safety signs clean and legible at all
times.
• Replace safety signs that are missing or
become illegible.
If original parts on which a safety sign was
•
installed are replaced, be sure the repair part
also bears the current safety sign.
Safety signs are available from your Dealer
•
Parts Department.
2.3.1

Safety Sign Installation

a. Be sure the installation area is clean and dry.
b. Decide on the exact location before you remove
the decal backing paper.
c. Remove the smaller portion of the split backing
paper.
d. Place the sign in position and slowly peel back
the remaining paper, smoothing the sign as it is
applied.
e. Small air pockets can be smoothed out or pricked
with a pin.
7
WARNING
CAUTION
Model Year - 2009