Spare Sickle - MacDon A30-S Operator's Manual

7.8.6

Spare Sickle

a. A spare sickle complete with knife head on
single knife headers may be stored in the
header frame tube at right end as shown.
Ensure sickle is secured in place.
b. Spare knives with the knife head for double knife
headers may be stored inside the lean bar. The
LH knife is stored at the LH end of the lean bar
and the RH knife is stored at the right end of the
lean bar. To remove the knife, refer to following
illustration and proceed as follows:
1. Remove bolts (A) from lean bar end cap.
2. Pull out end cap and plastic storage tube
assembly (B) with the knife inside.
3. Slide knife from storage tube (B).
4. Replace storage tube inside lean bar.
5. Reinstall bolts (A) and tighten.
Form # 169000
MAINTENANCE/SERVICE
A
B
107
Model Year - 2009