Pull-Type Mower Conditioner; Break-In Inspection - Pt; Interval Maintenance - Pt - MacDon A30-S Operator's Manual

7.17.2

Pull-Type Mower Conditioner

7.17.2.1 Break-In Inspection - PT

HRS.
1
Steering Cylinder Clevis & Stroke Control
5, 25, 50
5
10
10

7.17.2.2 Interval Maintenance - PT

INTERVAL
FIRST USE
1. Check Conditioner Drive Gearbox Lubricant
100 HOURS OR
ANNUALLY * 2. Check Wobble Box Lubricant Level.
3. Check Wobble Box Mounting Bolt Torques.
END OF SEASON
1. Check Hydraulic Oil Level.
2. Check Hydraulic Hoses And Lines For Leaks.
10 HOURS OR
3. Oil Sickle (Except In Sandy Conditions.
DAILY
4. Check Sickle Sections, Guards, & Hold-
25 HOURS 1. Grease Sickle Head.
1. Grease APT Pivot.
2. Grease Reel Shaft Bearings.
3. Grease Auger Shaft Bearings.
4. Grease Auger Jack-Shaft Bearings.
50 HOURS
5. Grease Conditioner Universal Shafts.
6. Grease Conditioner Shaft Bearings.
7. Grease Roll Pivots Bearing.
250 HOURS
500 HOURS OR 3
YEARS
1000 HOURS OR 3
1. Change Wobble Box Lubricant.
YEARS
* IT IS RECOMMENDED THAT ANNUAL MAINTENANCE BE DONE PRIOR TO START OF OPERATING SEASON.
Form # 169000
MAINTENANCE/SERVICE
ITEM
Wheel Bolts
Auger Drive Belt
Reel Drive Belt
Sickle Drive Belt
Hardware
Auger Drive Chain
Reel Drive Chain
Wobble Box Mtg Bolts
Refer To Section 7.17.2.1. Break-In Inspection
Level.
Downs
Change Hydraulic Oil Filter.
Change Hydraulic Oil.
CHECK
Torque
Torque
Tension
Tension
Tension
Torque
Tension/Lub.
Tension/Lub.
Torque
SERVICE
4. Check Wheel Bolt Torques.
5. Grease Wheel Hub Bearings.
6. Change Hydraulic Oil Filter (First 100
Hours Only, Every 250 Hours Thereafter).
Refer To Section 6.19, STORAGE.
5. Oil Reel Drive Chain.
6. Oil Auger Drive Chain.
7. Check Tire Pressure.
8. Check Wobble Box Bolt Torque (First 10
Hours Only, Every 100 Hours Thereafter).
8. Grease Frame-To-Header Pivots.
9. Grease Lower Float Link Bushings.
10. Grease Gauge Roller Bearings.
11. Change Wobble Box Lubricant. (First 50
Hours Only, Every 1000 Hours Thereafter).
12. Change Conditioner Drive Gearbox
Lubricant (First 50 Hours Only, Every 1000
Hours Thereafter).
2. Change Conditioner Drive Gearbox
Lubricant.
161
REFERENCE
120 ft∙lbf (160 N∙m) Sec. 6.15.1
52 ft∙lbf (72 N∙m)
Sec. 7.11.3 & 7.11.4
Sec. 7.9.2
Sec. 7.8.8 & 7.8.9
Sec. 6.5
Sec. 7.11.1 & 7.11.2
Sec. 7.9.1
200 ft∙lbf (270 N∙m) Sec.7.8.10.
Model Year - 2009