Reel Vertical Position, A30-S And A30-D - MacDon A30-S Operator's Manual

6.17.5.2 Reel Vertical Position, A30-S and A30-D

Adjustment at forward adjuster bolt should
be 0.47 inches (12 mm) lower than at rear
adjuster bolt.
a. Open LH end shield.
b. Loosen the four nuts (A).
c. Loosen jam-nuts on adjuster bolts (B) and turn
bolts (B) to raise or lower reel.
d. Tighten jam-nuts and nuts (A).
e. Close shield before engaging header.
Form # 169000
NOTE
A
B
OPERATION
f. Open RH end shield.
g. Loosen the reel drive chain (C) as follows:
E
1. Loosen nut (D) on sprocket.
2. Loosen jam-nut on adjuster bolt (E).
3. Turn adjuster bolt (E) to loosen chain.
h. Loosen the four nuts (F).
i. Loosen jam-nuts on adjuster bolts (G) and turn
adjuster bolts to raise or lower reel.
Adjustment at forward adjuster bolt should
be 0.47 inches (12 mm) lower than at rear
adjuster bolt.
j. Tighten jam-nuts and four nuts (F.
64
D
C
F
G
NOTE
(continued next page)
Model Year - 2009