Break-In Period; Pre-Season Check; Daily Start-Up Check - MacDon A30-S Operator's Manual

6.9 BREAK-IN PERIOD

a. After attaching header/windrower to tractor for
the first time, operate the machine slowly for 5
minutes, watching and listening FROM THE
TRACTOR SEAT for binding or interfering parts.
Until you become familiar with the sound
and feel of your new windrower, be extra
alert and attentive.
CAUTION
Before investigating an unusual sound or
attempting to correct a problem, shut off
tractor, engage parking brake and remove
key.
b. Perform the items specified in 7.17.1.1 Break-In
Inspection – SP, or 7.17.2.1 Break-In Inspection
- PT.

6.10 PRE-SEASON CHECK

Perform the following the beginning of each
operating season:
CAUTION
Review the Operator's Manual to refresh
•
your memory on safety and operating
recommendations.
Review all safety signs and other decals
•
on the mower conditioner and note
hazard areas.
• Be sure all shields and guards are
properly installed and secured. Never
alter or remove safety equipment.
Be sure you understand and have
•
practiced safe use of all controls. Know
the capacity
characteristics of the machine.
Check the
•
extinguisher. Know where they are and
how to use them.
a. Adjust tension on drive belts. Refer to Section
7.8, Sickle and Sickle Drive, Section 7.9, Reel
and Reel Drive, Section 7.11, Auger and Auger
Drive.
b. Lubricate chains and adjust tensions. Refer to
Section 7.6.2, Oiling, and Section 7.9.1, Reel
Drive Chain, and Section 7.11, Auger and Auger
Drive.
c. Check tire pressure and adjust as required. See
Section 7.14.4 Tire Inflation.
Form # 169000
NOTE
and operating
first aid kit and
OPERATION
d. Perform all annual maintenance. See Section
7.17, Maintenance Schedule.

6.11 DAILY START-UP CHECK

Do the following each day before start-up:
Be sure tractor and windrower are
•
properly attached, all controls are in
neutral and tractor brake is engaged.
Clear the area of other persons, pets etc.
•
Keep children away from machinery.
Walk around the windrower to be sure no
one is under, on or close to it.
Wear close fitting clothing and protective
•
shoes with slip resistant soles.
Remove
•
machine and surrounding area.
As well, carry with you any protective
•
clothing and personal safety devices that
COULD be necessary through the day.
Don't take chances.
• You may need:
o
o
o
o
o
Protect against noise. Wear
•
a suitable hearing protective
fire
device such as ear muffs or
ear plugs to protect against
objectionable
uncomfortable loud noises.
a. Check the machine for leaks or any parts that
are missing, broken, or not working correctly.
Use proper procedure when searching for
pressurized fluid leaks. Refer to Section
7.7.3 Hoses and Lines.
b. Clean all lights and reflective surfaces on the
machine. Check lights for proper operation.
c. Perform all Daily maintenance. Refer to Section
7.17, Maintenance Schedule.
46
CAUTION
foreign objects
- a hard hat
- protective glasses or goggles
- heavy gloves
- respirator or filter mask
- wet weather gear
NOTE:
from the
or
Model Year - 2009