7.8.2
Sickle Removal
WARNING:
Stand to rear of sickle during removal to
reduce risk of injury from cutting edges.
Wear heavy gloves when handling sickle.
a. Stroke sickle to its outer limit.
D
b. Clean area around sickle head and remove nut
and bolt (C).
c. Remove grease zerk from pin (D).
d. Insert screwdriver in groove of pin (D) and pry
up on sickle head pin to free sickle. Pin does
not have to be removed from arm.
e. Pull sickle out.
f.
Cover sickle head to shield bearing from dirt.
Form # 169000
MAINTENANCE/SERVICE
C
105
Model Year - 2009