Maintenance Schedule; Self-Propelled; Break-In Inspection - Sp; Interval Maintenance - Sp - MacDon A30-S Operator's Manual

7.17 MAINTENANCE SCHEDULE

The following maintenance
periodic maintenance procedures, and are
organized by service
maintenance is the best insurance against early
wear and untimely breakdowns. Following this
schedule will increase machine life. For detailed
instructions, refer to the specific headings in
Section 6, Maintenance/Service.
Recommended service intervals are in hours of
operation. Where a service interval is given in
more than one time frame, e.g. "100 hours or
Annually", service the machine at whichever
interval is reached first.
7.17.1

Self-Propelled

The following service schedule is only applicable to the Windrower Header. Refer to your Tractor Operator's
Manual #169007 for tractor maintenance.

7.17.1.1 Break-In Inspection - SP

HRS.
5
5, 25, & 50
10

7.17.1.2 Interval Maintenance - SP

INTERVAL
FIRST USE
100 HOURS OR
ANNUALLY *
END OF SEASON
10 HOURS OR
DAILY
25 HOURS
50 HOURS
1000 HOURS OR 3
YEARS
Form # 169000
MAINTENANCE/SERVICE
schedules
intervals. Regular
ITEM
Hardware
Auger Drive Belt
Reel Drive Belt
Sickle Drive Belt
Auger Drive Chain
Reel Drive Chain
Wobble Box Mounting Bolts
1. Check Conditioner Drive Gearbox
Lubricant Level.
2. Check Wobble Box Lubricant Level.
1. Check Hydraulic Hoses And Lines For
Leaks.
2. Oil Sickle (Except In Sandy Conditions.
3. Check Sickle Sections, Guards, & Hold-
Downs
1. Grease Sickle Head.
1. Grease Reel Shaft Bearings.
2. Grease Auger Shaft Bearings.
3. Grease Auger Jack-Shaft Bearings (except
A40-D).
4. Grease Conditioner Universal Shafts.
5. Grease Conditioner Shaft Bearings.
6. Grease Roll Pivots Bearing.
1. Change Wobble Box Lubricant.
Recommended intervals are for average
conditions. Service the machine more
list
often if operated under adverse conditions
(severe dust, extra heavy loads, etc.).
Carefully follow safety messages given
under Section 7.2, Recommended Safety
Procedures.
NOTE
CHECK
Torque
Tension
Tension
Tension
Tension/Lub.
Tension/Lub.
Torque
SERVICE
Refer To Section 7.17.1.1 Break-In Inspection.
3. Check Wobble Box Mounting Bolt
Refer To Section 6.19, STORAGE.
4. Oil Reel Drive Chain (except A40-D).
5. Oil Auger Drive Chain (except A40-D).
6. Check Wobble Box Bolt Torque (First 10
7. Grease Gauge Roller Bearings.
8. Change Wobble Box Lubricant. (First 50
9. Change Conditioner Drive Gearbox
2. Change Conditioner Drive Gearbox
Lubricant.
159
IMPORTANT
CAUTION
REFERENCE
Sec. 6.5
Sec. 7.11.3 & 7.11.4
Sec. 7.9.2
Sec. 7.8.8 & 7.8.9
Sec. 7.11.1 & 7.11.2
Sec. 7.9.1
200 ft∙lbf (270 N∙m) Sec.7.8.10.
Torques.
Hours Only, Every 100 Hours Thereafter).
Hours Only, Every 1000 Hours Thereafter).
Lubricant (First 50 Hours Only, Every 1000
Hours Thereafter).
Model Year - 2009