MacDon A30-D Supplement Operators Manual
Pull-type mower conditioner and self-propelled auger header
Hide thumbs
Also See for A30-D:
- Operator's manual (182 pages) ,
- Unloading and assembly instructions (51 pages) ,
- Assembly instructions manual (56 pages)
Related Manuals for MacDon A30-D
Summary of Contents for MacDon A30-D
- Page 1 A30-D and A40-D Pull-Type Mower Conditioner and Self-Propelled Auger Header Supplement to Operator’s Manual 169000_SUPPLEMENT_2 Revision D Original Instruction The harvesting specialists.
- Page 2 Purpose of Supplement After your operator’s manual was printed, a decal was added to the A30-D mower conditioner hitch to alert the Operator that the transport lock pin must be in place before transport. Replace the following pages of the A30-D and A40-D Operator’s Manual, 169000 Revision F, with the pages provided in this supplement: •...
- Page 3 1 Safety 1.1 Safety Sign Locations: Pull Type Figure 1.1: Left Side A - MD #174632 B - MD #184422 C - MD #166452 D - MD #113482 E - MD #194464 F - MD #174436 G - MD #171287 H - MD #171279 J - MD #36651 K - MD #194521...
- Page 4 SAFETY Figure 1.3: Right Side A - MD #171279 B - MD #184372 C - MD #171287 D - MD #184422 E - MD #174632 F - MD #166452 Figure 1.4: Decals on Right Side 169000_SUPPLEMENT_2 Revision D...
- Page 5 SAFETY Figure 1.5: Hitch A - MD #194464 B - MD #113482 C - MD #174436 D - MD #171281 E - MD #171281 F - MD #171286 G - MD #171298 Figure 1.6: Decals on Hitch 169000_SUPPLEMENT_2 Revision D...
-
Page 6: Understanding Safety Signs
SAFETY 1.2 Understanding Safety Signs MD #36651 Rotating driveline DANGER • Rotating driveline contact cause death— keep away! Do not operate without: • Stopping the engine and removing the key before opening shield. • All driveline guards, tractor, and equipment shields in place. - Page 7 SAFETY MD #166452 Pinch point hazard WARNING • To avoid injury, stop the engine and remove the key before opening engine hood. Figure 1.9: MD #166452 MD #171279 Crushing hazard DANGER • Read the operator’s manual and follow all safety instructions.
- Page 8 SAFETY MD #171286 Lock pull-type hydraulic for transport WARNING • Charge cylinder with oil before towing. • Rotate valve handle to lock in transport position. • Maximum towing speed 20 mph (32 km/h). • Failure to comply could result in death or serious injury. Figure 1.12: MD #171286 MD #171287 Install lock panel...
- Page 9 SAFETY MD #171298 PT transport lock pin WARNING • Transport lock pin must be in place before transport. • Failure to comply could result in death or serious injury. Figure 1.15: MD #171298 MD #174436 High pressure oil hazard WARNING •...
- Page 10 SAFETY MD #184372 General hazard pertaining machine operation and servicing CAUTION To avoid injury or death from improper or unsafe machine operation: • Read the operator’s manual and follow all safety instructions. If you do not have a manual, obtain one from your Dealer.
- Page 11 SAFETY MD #194464 Shut down for service WARNING • Remove key from ignition. • Read tractor and mower manufacturer’s manuals for inspection and maintenance instructions. • Read the windrower and header manuals for inspection and maintenance instructions. Figure 1.20: MD #194464 MD #194521 Auger entanglement hazard CAUTION...
- Page 12 SAFETY 1.3 Preparing Mower Conditioner for Transport Charge the steering circuit as follows: 1. Connect two Articulating Power Tongue (APT) steering cylinder hoses to a tractor hydraulic circuit. 2. Steer header completely to the left, then right. Repeat three or four times. 3.
- Page 13 SAFETY 6. Install the transport pin as follows. 7. Remove pin from storage at aft end of APT. Figure 1.25: Transport Lock Pin 8. Line up holes in APT and frame, and install transport lock pin (A) as shown. 9. Secure with lynch pin (B). Figure 1.26: Transport Lock Pin 10.
- Page 16 10708 N. Pomona Avenue Kansas City, Missouri United States 64153-1924 t. (816) 891-7313 f. (816) 891-7323 MacDon Australia Pty. Ltd. A.C.N. 079 393 721 P.O. Box 243, Suite 3, 143 Main Street Greensborough, Victoria, Australia 3088 t. 03 9432 9982 f.