Auger Fore-Aft Adjustment - A40-D; Auger Vertical Adjustment - A40-D - MacDon A30-S Operator's Manual
Pull-type mower conditioners, self-propelled auger headers
Hide thumbs
Also See for A30-S:
- Operator's manual (192 pages) ,
- Unloading and assembly instructions (56 pages) ,
- Assembly instructions manual (56 pages)
Table of Contents
Advertisement
6.17.4.5 Auger Fore-Aft Adjustment – A40-D
a. Open LH end shield.
b. Loosen the four nuts (A).
c. Loosen jam-nut on adjuster bolt (B) and turn bolt
(B) to adjust auger fore-aft position.
d. Tighten jam-nut.
e. Tighten nuts (A).
f.
Close shield before engaging header.
g.
Open RH end shield.
D
h. Loosen the four nuts (C).
i.
Loosen jam-nut on adjuster bolt (D) turn bolt (D)
to adjust auger fore-aft position.
j.
Tighten jam-nut.
k. Tighten nuts (C).
l.
Close shield before engaging header.
Form # 169000
A
B
C
OPERATION
6.17.4.6 Auger Vertical Adjustment – A40-D
a. Open LH end shield.
b. Loosen the four nuts (E).
c. Loosen jam-nuts on adjuster bolts (F) and turn
bolts (B) to adjust auger vertical position.
d. Tighten jam-nuts.
e. Tighten nuts (E).
f.
Close shield before engaging header.
g. Open RH end shield.
h. Loosen the four nuts (G).
i.
Loosen jam-nuts on adjuster bolts (H) turn bolts
(H) to adjust auger vertical position.
j.
Tighten jam-nuts.
k. Tighten nuts (G).
l.
Close shield before engaging header.
62
E
F
G
H
Model Year - 2009
Advertisement
Table of Contents
