Mercedes-Benz Zetros 2020 Operating Instructions Manual page 81

Events menu window
You can display stored malfunctions and mes-
Events
sages in the menu. If you have recti-
fied the cause of the malfunction/message,
the on-board computer no longer displays the
event.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Events menu window.
The menu window shows, for example, the
number of events.
X
To display an event: press 9.
X
To show further events: press the r or
s button.
Diagnostics menu window
Diagnostics data contains information with
which you can assist the workshop staff during
fault diagnosis, e.g. by remote diagnosis. The
Diagnosis
menu window contains, for exam-
ple, a list of all control units (systems) instal-
led in the vehicle.
You can obtain further information from any
Mercedes-Benz Service Centre.
X
Use the u or t button to scroll to ã
monitoring info.
X
Use the r or s button to scroll to the
Diagnosis
menu window.
X
To display diagnostics data: press 9.
The input window shows a list of all control
unit system abbreviations.
X
Select the desired control unit using the
r or s button.
X
Display further details on the control unit by
pressing the u button.
Settings menu
Menu window menu
If you change the settings in the
window, the changes affect the display of the
menu window.
X
Use the u or t button to scroll to ä
settings.
X
To set the units of measurement: press
the 9 button.
The input window displays a list of possible
settings:
R
R
R
R
R
R
R
R
X
Select the desired menu bar with the r
or s button.
X
Change the setting with the u or t
button.
Lighting menu window
In the lighting menu window you can:
adjust the headlamp range of the dipped-
R
beam headlamps
adjust the brightness of the instrument clus-
R
ter lighting and audio display, when it is dark
and the lights are switched on
switch the automatic control of the interior
R
lighting on/off
X
Use the u or t button to scroll to ä
settings.
X
Use the r or s button to scroll to the
Lighting
X
Press the 9 button.
The menu window shows the
range
X
To adjust the headlamp range of the
dipped-beam headlamps: change the set-
ting using the u or t button.
When the vehicle is laden, the road should
be illuminated from 40 m to 100 m and the
dipped-beam headlamps must not dazzle
Menu
menu
oncoming vehicles. If the vehicle is unladen,
select position u.
X To set the instrument cluster lighting:
use the r or s button to select
Instrument
You can only adjust the brightness of the
instrument cluster and the switches if night
mode has been detected and the lighting is
On-board computer
24h 12h
clock mode in or
speed in km/h or mph
km mi
distance in or
liquid units in litres,
°C
temperature units in
average fuel consumption in
km/l mpg
or
bar/kpa
pressure units in
weight units in t, tn
or
menu window.
ctrl. input window.
panel.
UK gal US gal
or
°F
or
l/100 km,
psi
or
l.tn
Headl.
Z
79