Mercedes-Benz Zetros 2020 Operating Instructions Manual page 24

Introduction
22
Components
TCC
Electromagnetic compatibility
The electromagnetic compatibility of the vehi-
cle components has been checked and certi-
fied according to the currently valid version of
Regulation UN R10.
Jack
Transcript and translation of the original decla-
ration of conformity:
EC Declaration of conformity 2006/42/EC
We, WEBER-HYDRAULIK GMBH, Heilbronner
Str. 30, 74363 Güglingen, Germany, hereby
declare that the product "Weber hydraulic
jack" models:
A AD ADX AH AHX AL AT ATD ATDX ATG ATN
ATGX ATPX ATQ AX
Load: 2,000 to 100,000 kg
Serial no.: from construction year 01/2010
comply with the relevant fundamental regula-
tions of the EC machinery directive for safety
and health.
This EC declaration of conformity shall
become void:
if modifications are made or repairs are car-
R
ried out by unqualified persons
if the products are not employed in accord-
R
ance with the application specified in the
Operating Instructions
if the mandatory regular inspections are not
R
carried out
Relevant EC Directives: Machinery guideline
mark 2006/42/EC
Applicable norms: ISO 11530
Quality assurance: DIN EN ISO 9001:2000
Güglingen, 1 July 2013
Signed by:
Managing Director, WEBER-HYDRAULIK GmBH
Authorised technical documentation represen-
tative, WEBER-HYDRAULIK GmBH
Heilbronner Straße 30, 74363 Güglingen, Ger-
many
Service Waveband
® 2.4 GHz waveband
Bluetooth
® 2.4 GHz waveband
Bluetooth
Diagnostics connection
The diagnostics connection is used for con-
necting diagnostic devices at a qualified spe-
cialist workshop.
G
WARNING
If you connect equipment to the vehicle's
diagnostics connection, it can result in mal-
functions of the vehicle systems. This may
impair the vehicle's operating safety. There
is a risk of an accident.
Only connect devices to the diagnostics
connection that have been checked in terms
of their suitability and safety.
G
WARNING
Make sure that there is sufficient clearance
around the pedals when floormats are used,
and that the floormats are properly secured.
The floormats must be correctly secured at
all times using the securing knob and retain-
ers.
Before you drive off, check the floormats
and secure them if necessary. A floormat
which is not properly secured can slip and
thereby interfere with the movement of the
pedals.
Do not place floormats on top of one
another.
Battery discharging due to use of devices
!
on the diagnostics connection.
The use of the device on the diagnostics
connection strains the battery.
Checking the charge status of the battery.
R
Loading procedure when the battery is
R
low.
Transmission output
2.5 mW
2.5 mW