Mercedes-Benz Zetros 2020 Operating Instructions Manual page 79

X
To select an MP3 file or to open a folder:
press the u button.
X
To close the current folder: briefly press
the t button.
X
To close the MP3 browser: press and hold
the t button.
Adjusting the volume
Example
In audio mode, you can adjust the volume at
any time.
X
To increase or decrease the volume:
press W or X.
Operation and maintenance menu
Trailer/semitrailer menu window
Trailer
The menu window is available when a
trailer/semitrailer is coupled up. The possible
displays depend on your trailer/semitrailer's
equipment. Observe the notes on equipment
and their operation in the manufacturer's
operating instructions for the trailer/semi-
trailer.
X
Using the u or t button, scroll to â
operation and maintenance.
X
Use the r or s button to scroll to the
Trailer
menu window.
X
Press the 9 button.
The display shows the first input window,
Brake info.
e.g.
X
Display the next input window with the u
or t button.
The following information/input windows
may be displayed, depending on the equip-
ment installed:
On-board computer
Brake info
displays the temperature
R
and the wear of the trailer/semitrailer
brake
Reserve pressure
R
pressure in the trailer/semitrailer
compressed-air reservoir
R
Maintenance menu window
! If you confirm maintenance work, without
having it performed according to schedule,
you can damage the vehicle and the assem-
blies. Wear can increase.
If you inadvertently confirm maintenance
work or confirm it too early, the mainte-
nance system calculates the new mainte-
nance due date. To prevent damage to the
vehicle or assemblies, have the correspond-
ing maintenance work performed immedi-
ately.
Only confirm the maintenance work when
the maintenance work has been performed.
The maintenance system calculates mainte-
nance due dates for the vehicle and its assem-
blies based on the vehicle's operating condi-
tions. The event window automatically displays
maintenance due dates 14 days in advance.
When the maintenance due date has been
reached or exceeded, the on-board computer
shows additional event windows
Y
( page 84).
If the maintenance work is carried out at a
Mercedes-Benz Service Centre, the fact that
the work has been carried out professionally
will be confirmed in the on-board computer
and the service report.
X
Using the u or t button, scroll to â
operation and maintenance.
X
Using the r or s button, scroll to the
Maintenance
menu window.
X
To display the maintenance point and
due date: press the 9 button.
The input window shows, for example:
the maintenance point
R
the maintenance due date
R
the remaining distance
R
displays the reservoir
Engine
23.09.2014
2000 km
Z
77