Equipment Operation - Mercedes-Benz Zetros 2020 Operating Instructions Manual

Benz Service Centre if you have any ques-
tions.
The driving, braking and steering character-
R
istics of the vehicle alter with coupled or
attached equipment due to the wide side
clearance and the swing weight of the
equipment.
Drive with even greater care.
Before opening the bonnet, make sure that the
attached equipment is not in the swinging
range of the bonnet. If the attached equipment
is in the swinging range of the bonnet, fold
down the attached equipment.
Basic wiring on the front-mounted
attachment
Attached equipment connections on the front
bumper
Connection for the voltage supply
:
Connection for operation
;
Connection for the lighting
=
The connections for the voltage supply and
operation comply with EN 16330. The connec-
tions for the lighting comply with EN 15431.
The front mounting plate is size 5.

Equipment operation

Centre console
Connection for attached equipment control
?
panel
Auxiliary headlamps on the roof
If the attached equipment covers the head-
lamp, switch on the auxiliary headlamps.
When using the auxiliary headlamps, observe
the country-specific laws and regulations.
Before using the auxiliary headlamps, check
their settings.
Auxiliary headlamps
A
143
Z