Mercedes-Benz Zetros 2020 Operating Instructions Manual page 52

lighting system
50
X
Insert new bulb ; and turn clockwise,
applying light pressure.
X
Insert bulb holder : into the housing and
turn it clockwise, in the opposite direction
to the arrow, as far as it will go.
Foglamps
X
Open the bonnet (
X
Make sure that a suitable new cable tie is
available.
X
Cut cable tie : without damaging front fog-
lamp cover ;.
X
Pull the connector off the bulb.
X
Unclip the retaining springs and take out the
bulb.
X
Insert the new bulb into the bulb holder in
such a way that its base fits into the recess.
Bonnet, turn signal and side marker
lamps
Front turn signal
Y
page 156).
Side turn signal lamps and side marker lamps
X
Y
Open the bonnet (
X
Turn bulb holder : anti-clockwise and
remove it.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
Front perimeter lamps
X
Remove screw ;.
X
Remove the frame.
X
Turn lens : anti-clockwise and remove it.
X
Turn the bulb anti-clockwise, applying light
pressure, and remove it.
X
Insert the new bulb and turn clockwise,
applying light pressure.
page 156).