Seats - Mercedes-Benz Zetros 2020 Operating Instructions Manual

Always have work on the seats performed at a
qualified specialist workshop.
Operating the seats
General notes
Your vehicle may be equipped with different
types of seats depending on the cab and the
vehicle's equipment:
standard suspension seat
R
centre seat
R
To operate a suspension seat, a supply pres-
sure of at least 7 bar is required in your vehi-
cle's compressed-air system.
standard suspension seat
X
Observe the notes on seats (
i Depending on the seat design, some set-
ting options may not be available.
X
To adjust the backrest: relieve the back-
rest of any weight.
X
Pull lever : up and hold it.
X
Apply weight to or relieve the seat backrest
of any weight in order to move it into the
desired position.
X
Release lever :.
X
To set the seat fore-and-aft adjustment:
pull lever B upwards and hold it.
X
Push the seat forwards or backwards in
order to move it into the desired position.
X
Release lever B.
X
Slide the seat forwards/backwards until it
engages audibly.
X
To adjust the seat cushion length: pull
lever C upwards and hold it.
X
Push the seat cushion forwards or back-
wards in order to move it into the desired
position.
X
Release lever C.
X
To adjust the seat cushion angle: pull
lever ? upwards and hold it.
X
Apply weight to or relieve the seat cushion
or backrest of any weight in order to move it
into the desired position.
X
Release lever ?.
X
To adjust the seat height: pull lever = up
or push it down one level.
The seat is raised or lowered by one level.
X
To adjust the oscillation damper: set the
oscillation damper using lever A to prevent
the seat from bottoming out.
X
To use the EASY-ENTRY/EXIT feature:
press lever ; downwards.
The seat is lowered completely.
X
Pull lever ; upwards.
The seat returns to the previously set
height.
Y
page 40).

Seats

41
Z