Pip-Picture In Picture; Piv-Pin Protect; Ppp-Picture-In-Picture And Picture-By-Picture Layout - Christie GS Series Technical Reference

PIP–Picture in Picture
Enables or disables picture-in-picture (PIP) mode.
Commands
Command Description
PIP <value> Enables or disables the picture-
in-picture window.
Examples
Return the state of the PIP contro:
(PIP?)
Disable picture-in-picture video:
(PIP 0)
Enable picture-in-picture video:
(PIP 1)
PIV–PIN Protect
Activates password protection on the projector, where a personal identification number (PIN) must be
provided before an image can be displayed.
Commands
Command Description
PIV "XXXXX" Activates password protection on the
projector.
Examples
Set the PIN to 33445:
(PIN "33445")
PPP–Picture-in-Picture and Picture-by-Picture
Layout
Chooses a preset location for the picture-in-picture window.
The Location settings adjust the position of the window. Blanking is not affected. While in split screen
mode, several channel controls that resize image are disabled.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Values
0 = Disables the picture-in-picture video (Default)
1 = Enables the picture-in-picture video
Values
X = 0 to 9
Replace each X with a number from 0 to 9
Serial API commands
46