Pps-Picture-In-Picture Swap; Pst-Picture Setting - Christie GS Series Technical Reference

Commands
Command Description
PPP <value> Selects the picture-in-picture window location.
Examples
Set the picture-in-picture to the top left:
(PPP 6)
PPS–Picture-in-Picture Swap
Swaps the current main and picture-in-picture inputs, regardless if valid signals are on either of the
inputs.
Commands
Command Description
PPS Swaps the main and picture-in-picture input.
PST–Picture Setting
Changes the values for picture-related settings for the current source to a set of predefined values.
This setting optimizes the projector display for certain conditions, such as whiteboard, blackboard,
beige wall, and so on. Applying this setting affects the following:
• Gamma
• Sharpness
• White peaking
• Overscan
• Brightness
• Contrast
• Color
• Tint
• Gain—red, green, blue
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
0 = Left vertical center
1 = Top center
2 = Right vertical center
3 = Bottom center
4 = Bottom right
5 = Bottom left
6 = Top left
7 = Top right
Values
—
47