Enabling Basic Image Blending; Blending Multiple Images - Christie D13WU2-HS User Manual

5. To download the selected warp setting, click OK.
6. To apply the warp setting to the projector, on the canvas, right-click a projector window and
select Send Warp.

Enabling basic image blending

Configure blends directly on the projector to increase or decrease the borders of an individual
image, so it blends with a neighboring image to create a single, seamless image.
You can set blends on a projector when not using Christie Twist and Mystique. Connecting to Twist
and Mystique grays out the blend settings on the projector. Applying blends from Twist and
Mystique overwrites the blends directly set on the projectors.
1. Select Menu > Size & Position > Geometry Correction > Blend Area.
2. Choose a side to blend in with the other projectors.
3. To set up the starting position, select Start Pixel.
4. Adjust the slider by arrow keys or press ENTER to input the starting position.
5. After inputting the starting position, press ENTER.
6. To set up the size of blend area, select Pixel Height.
7. Adjust the slider by arrow keys or press ENTER to input the width of blend area.
8. After inputting the size of blend area, press ENTER.
9. To set the gamma value of the blend area, select Blend Gamma.
10. After selecting a gamma value, press ENTER.
11. To apply the settings, select Enable.
12. Press ENTER.
13. To save the blend setting, select Menu > Size & Position > Geometry Correction > Blend
Memory > Save Blend.
14. To set up the other side of blend area, repeat step 2 to 13.

Blending multiple images

Use Christie Twist to manually configure edge blends and apply them to the projectors.
Christie Twist Premium and Twist Pro offer advanced blending options. Refer to the Christie website
(www.christiedigital.com) for product information and documentation.
1. Connect the projector and computer to the same network and subnet.
2. To add a projector to a computer, from the Twist menu, click Home > Add.
• To manually connect the projector with Twist, use port 3003.
• Connecting to Twist grays out the Geometry Correction settings on the projector.
3. Select a record number to save the blend setting.
You can save up to four blend settings.
HS Series 2K User Manual — D13HD2-HS, D13WU2-HS, D16HD-HS, D16WU-HS, D20HD-HS, D20WU-HS
020-001466-06 Rev. 1 (12-2022)
Copyright ©2022 Christie Digital Systems USA Inc. All rights reserved.
Adjusting the size and position
32