Apw-Auto Power On; Ash-Auto Shutdown - Christie GS Series Technical Reference

Reacquire a signal in wide mode:
(AIM 1)
APW–Auto Power On
Turns the projector on with a wall switch and bypasses standby mode.
Commands
Command Description
APW <0 | 1> Automatically powers up the projector to the
on state.
Examples
Turn off auto power:
(APW 0)
Turn on auto power:
(APW 1)
ASH–Auto Shutdown
Moves the projector to standby mode if it is in search mode and cannot detect an active signal within a
set period.
Commands
Command Description
ASH <value> Enables or disables auto
shutdown.
Examples
Turn off auto shutdown:
(ASH 0)
Activate auto shutdown after ten minutes:
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Values
0 = Disables auto power up (Default)
1 = Enables auto power up
Values
0 = Turns off auto shutdown (Default)
1 = Activates auto shutdown after five minutes
2 = Activates auto shutdown after 10 minutes
3 = Activates auto shutdown after 15 minutes
4 = Activates auto shutdown after 20 minutes
5 = Activates auto shutdown after 25 minutes
6 = Activates auto shutdown after 30 minutes
Serial API commands
11