Brt-Brightness; Bss-Blank On Signal Switch; Cca-Color Matching - Christie GS Series Technical Reference

BRT–Brightness
Adjusts the image black level by applying an offset to the input image.
Commands
Command Description
BRT <value> Sets the black level value.
Examples
Set the black level value to 50:
(BRT 50)
BSS–Blank on Signal Switch
Modifies the projector response when it is acquiring a signal or switching inputs.
Commands
Command Description
BSS <0 | 1> Enables or disables the signal switch.
Examples
Turn signal switch off:
(BSS 0)
Turn signal switch on:
(BSS 1)
CCA–Color Matching
Defines the hue of each primary color component (red, CCA green, blue, and white).
Commands
Command Description
CCA+MTRA <0 | 1> Enables or disables meter adjustments.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
0 to 100
50 (Default)
Values
0 = Turns the blank on signal switch off
(Default)
1 = Turns the blank on signal switch on
Values
0 = Turns off meter adjustments (Default)
1 = Turns on meter adjustments
14