Dzh-Digital Horizontal Zoom; Dzv-Digital Vertical Zoom - Christie GS Series Technical Reference

Commands
Command Description
DTL <value> Sets the sharpness setting.
Examples
Set the sharpness setting to low:
(DTL 1)
DZH–Digital Horizontal Zoom
Changes the size of projector horizontal display area.
If the display area has been resized with this setting, use the DSH—Digital Horizontal Shift (on page
23) and DSV—Digital Vertical Shift (on page 23) commands to readjust the image.
Commands
Command Description
DZH <value> Changes the size of the projector horizontal display
area.
Examples
Change the horizontal size of the display area to 100%:
(DZH 100)
DZV–Digital Vertical Zoom
Changes the size of projector vertical display area.
If the display area has been resized with this setting, use the DSH—Digital Horizontal Shift (on page
23) and DSV—Digital Vertical Shift (on page 23) commands to readjust the image.
Commands
Command Description
DZV <value> Changes the size of the projector vertical display area.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
0 = Maximum
1 = High
2 = Normal
3 = Low
4 = Minimum
Values
50% to 400%
100% (Default)
Values
50% to 400%
100% (Default)
24