Christie GS Series Technical Reference page 15

Command Description
CCA+MTTP <0 | 1> Enables or disables the automatic test
patterns for manual adjustment.
CCA+RDMI Specifies the red intensity.
CCA+RDMX Specifies the x coordinate for red.
CCA+RDMY Specifies the y coordinate for red.
CCA+GNMI Specifies the green intensity.
CCA+GNMX Specifies the x coordinate for green.
CCA+GNMY Specifies the y coordinate for green.
CCA+BLMI Specifies the blue intensity.
CCA+BLMX Specifies the x coordinate for blue.
CCA+BLMY Specifies the y coordinate for blue.
CCA+WHMI Specifies the white intensity.
CCA+WHMX Specifies the x coordinate for white.
CCA+WHMY Specifies the y coordinate for white.
CCA+RDDG Specifies the red gain.
CCA+RDDX Specifies the x coordinate for red gain.
CCA+RDDY Specifies the y coordinate for red gain.
CCA+GNDG Specifies the green gain.
CCA+GNDX Specifies the x coordinate for green gain.
GS Series Serial API Commands Technical Reference
020-000814-01 Rev. 1 (06-2015)
Serial API commands
Values
0 = Turns off automatic test patterns
1 = Turns on automatic test patterns
(Default)
100 to 10000
453 (Default)
0.300 t0 0.700
0.633 (Default)
0.300 to 0.500
0.356 (Default)
100 to 10000
2137 (Default)
0.300 to 0.400
0.352 (Default)
0.400 to 0.700
0.572 (Default)
100 to 10000
239 (Default)
0.100 to 0.300
0.140 (Default)
0.030 to 0.400
0.093 (Default)
100 to 10000
9219 (Default)
0.200 to 0.400
0.331 (Default)
0.200 to 0.400
0.380 (Default)
0.200 to 1.000
1.000 (Default)
0.300 to 0.700
0.643 (Default)
0.300 to 0.500
0.344 (Default)
0.200 to 1.000
1.000 (Default)
0.300 to 0.400
0.544 (Default)
15