Mitel MIVOICE OFFICE 400 User Manual page 91

Action type
Operator key
KT line
Interchangeable key caps
You can change the position of certain function keys or switch them with
other functions. You can swap existing key caps or fit keys with the addi-
tional key caps supplied in accordance with table below. The keys must
have been configured either by your system administrator or by yourself in
the Self Service Portal (see chapter "MiVoice Office 400 Self Service Por-
tal", page 9).
Function key
Call lists key
Do not disturb key
Line key L1
Line key L2
Line key L3
Line key L4
Forwarding button
Voice mail key
Mitel 6873 SIP
eud-1744/1.4 – R5.0 HF2 – 10.2017
Designation Description
Operator key Operator keys are configured by your system
administrator on your operator phone. You can
make some changes in the operator-key con-
figuration. External and internal calls are sig-
nalled dynamically and acoustically with alarm
melody on the operator keys. Contact your
sytem administrator for more information.
Line key KT lines are the external line keys. A KT line is
associated with a call distribution element
number (CDE). External user can reach you on
the KT line using the Direct Dial In (DDI) num-
ber associated with the KT line. Contact your
sytem administrator for more information. Your
phone becomes a key telephone as soon as
your system administrator has configured a KT
line on the top softkeys of your phone.
For more information on KT line keys, please
refer to "Line key on a key telephone",
page 70.
Key cap
interchangeable
yes
yes
yes
Personalizing your phone
Additional key cap
(included in the scope of
delivery)
yes
yes
yes
yes
yes
91